PULSAtron Series E Plus Metering Pump
6 GPD @ 150 PSI, 115 VAC4-20 mA Input with Dual Manual Control and Stop Function Input
Stroke frequency control via 4-20 mA signal input, manual stroke length control. Stroke frequency is manually adjustable when in local control. Includes stop function input.
Pulsafeeder PULSAtron Series E Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset. The Series E Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via 4-20mA DC and stop function inputs. Auto-Off-Manual switch.Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump - Key Features
- Manual Control by on-line adjustable stroke rate and stroke length.
- Highly Reliable timing circuit.
- Circuit Protection against voltage and current upsets.
- Panel Mounted Fuse.
- Solenoid Protection by thermal overload with auto-reset.
- Water Resistant, for outdoor and indoor applications.
- Indicator Lights, panel mounted.
- Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
- Few Moving Parts and Wall Mountable.
- Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
- Reliable metering performance.
- Rated "hot" for continuous duty.
- Leak-free, sealless, liquid end.
Diaphragm Metering Pump, Solenoid DrivenType
PULSAtron Series E PLUSProduct Line
Units of Measurement
Hose Barb Size
Draft Shield Dimensions
4-20 mA / Off / ManualOperating Modes
0.25Max. Flow (GPH)
6Max. Flow (GPD)
150Max. Pressure (PSI)
1,000Max. Viscosity (cps)
125Max. Strokes per Minute
4-20 mA Input with Dual Manual Control and Stop Function InputFlow Control
100:1Turn Down Ratio
316 SSHead / Fittings
PTFE faced CSPEDiaphragm
TFEValve / Seat / O-ring
Piping 1/4" NPT(F)Connections
115 VAC 50/60 Hz, US PlugPower Supply
Field of View
Max. Controlled Time Settings
Rim to Plate
Custom Fluorescence Filters
Fluorescence Filter Cubes
Horizontal Base Pole
Pod Ring I.D.
Vertical Base Pole
Zoom Range (Primary)
No Bleed Valve with this model.Notes
A foot valve/strainer assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, and Owners Manual.Includes
13 lbsNet Weight