Bracket Mount Mixer-Agitator mounts to a tank cover or other flat surface
The Bracket Mount Mixer provides a means of mounting a mixer to a tank cover or other flat surface. The shaft is coupled to the motor via a brass adapter which is held securely by four stainless steel set screws. The mounting bracket is constructed to steel with a corrosion resistant coating and all fasteners are 18/8 Stainless Steel.
Mixer Sizing Graph
To select the proper mixer horsepower and speed, follow the sizing graph below. For example: a 40 gallon tank at 100 cps would require a 1/4HP 1725 RPM mixer, and a 3,000 gallon tank at 400 cps would require a 1 1/2HP 350 RPM mixer.
FLUID VISCOSITY
TANK SIZE IN GALLONS
30
40
100
200
300
400
1,000
2,000
3,000
5,000
1 CPS
1/20 HP
1/20 HP
1/4 HP
1/3 HP
1/2 HP
1 HP
1/3 HP
1/3 HP
1/3 HP
1/2 HP
100 CPS
1/20 HP
1/4 HP
1/3 HP
1/2 HP
1 HP
1/3 HP
1/2 HP
1/3 HP
1/2 HP
1 HP
300 CPS
1/4 HP
1/3 HP
1/2 HP
1 HP
1/3 HP
1/2 HP
1/3 HP
3/4 HP
1 HP
1 HP
400 CPS
1/2 HP
1 HP
1/4 HP
1/3 HP
1/2 HP
1/3 HP
1/2 HP
1 HP
1 1/2 HP
2 HP
1000 CPS
1/4 HP
1/3 HP
1/2 HP
1/3 HP
1/3 HP
1/3 HP
3/4 HP
1 1/2 HP
2 HP
3 HP
2000 CPS
1/3 HP
1/2 HP
1/3 HP
1/2 HP
1/2 HP
1/2 HP
1 HP
1 1/2 HP
3 HP
5 HP
1725 RPM MIXERS
60 RPM MIXERS
350 RPM MIXERS
NOTE: Use the above mixing graph for basic mixer sizing. Application or intended use may change manufacturer recommendations. Please consult Nova-Tech International on other than standard mixing applications.
