	Your Cart is Empty
	View Cart

Search (Part# or Keyword)

Products
	Laboratory Equipment and Supply Products
	Chemical Metering Pumps
	Process Equipment Accessories
		Chemical Solution Tanks and Stands
		Drum-Tote-Tank Mixers-Agitators
			Bracket Mount Mixers-Agitators
			Clamp Mount Mixers-Agitators
				42735
				42784
				42785
				J64049
				J64041
				42740
				42794
				42795
				42837
				42736
				42787
				42744
				42802
				42803
				J64098
				J42868
				J64100
				J42878
				42745
				42804
				42805
				42751
				42816
				42817
				J64107
				J64109
				42738
				42790
				42791
				J42890
				J64007
				J64061
				J42882
				J42879
				42728
				42770
				42771
				42830
				J64012
				J64054
				J64067
				J64060
				J64001
				J64084
				J42874
				42737
				42788
				42789
				J64002
				J64032
			Flange Mount Mixers-Agitators
			Bung Mount Mixers-Agitators
		Pump Calibration Columns
		Pump Tubing
		Flow Indicators & Flow Meters
		Pulsafeeder Five Function Valves
		Liquid Level Controller
		Saddleblock Injection Adapters
		Chemical Injection Corporation Stops
		Pump Pulsation Dampeners
		Pump Power Controllers
		Polymer Mixing Eductor
		Miscellaneous Accessories
	Process Control Systems
	HVAC Maintenance Products
	Product Specials

Clamp Mount Mixers-Agitators

Clamp Mount Mixer-Agitator mounts to a vertical surface or support

The Clamp Mount Mixer provides a convenient method of attaching a mixer to a vertical surface or support such as the side wall of a tank or drum. This type of mount saves time since it requires no drilling or extra mixer supports. It also has the added advantage of being portable and can easily be transferred from one tank or drum to another.

Mixer Sizing Graph

1725 RPM MIXERS
FLUID VISCOSITY	TANK SIZE IN GALLONS
FLUID VISCOSITY	30	40	100	200	300	400
1 CPS	1/20 HP	1/20 HP	1/4 HP	1/3 HP	1/2 HP	1 HP
100 CPS	1/20 HP	1/4 HP	1/3 HP	1/2 HP	1 HP
300 CPS	1/4 HP	1/3 HP	1/2 HP	1 HP
400 CPS	1/2 HP	1 HP

NOTE: Use the above mixing graph for basic mixer sizing. Application or intended use may change manufacturer recommendations. Please consult Nova-Tech International on other than standard mixing applications.

Pulsafeeder Clamp Mount Mixer Datasheet

..........................

42735

Pulsafeeder Clamp Mount Mixer 42735-C-1-O-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.

Price: $430.00

..........................

42784

Pulsafeeder Clamp Mount Mixer 42784-C-1-O-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $540.00

..........................

42785

Pulsafeeder Clamp Mount Mixer 42785-C-1-O-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $545.00

..........................

J64049

Pulsafeeder Clamp Mount Mixer J64049-C-1-O-H/WRD
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set

Price: $465.00

..........................

J64041

Pulsafeeder Clamp Mount Mixer J64041-C-1-O-H/WRD/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $580.00

..........................

42740

Pulsafeeder Clamp Mount Mixer 42740-C-2-O-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.

Price: $640.00

..........................

42794

Pulsafeeder Clamp Mount Mixer 42794-C-2-O-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $750.00

..........................

42795

Pulsafeeder Clamp Mount Mixer 42795-C-2-O-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $755.00

..........................

42837

Pulsafeeder Clamp Mount Mixer 42837-C-2-O-H/WRD
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $670.00

..........................

42736

Pulsafeeder Clamp Mount Mixer 42735-C-3-O-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.

Price: $875.00

..........................

42787

Pulsafeeder Clamp Mount Mixer 42787-C-3-O-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $990.00

..........................

42744

Pulsafeeder Clamp Mount Mixer 42744-C-4-O-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.

Price: $1,040.00

..........................

42802

Pulsafeeder Clamp Mount Mixer 42802-C-4-O-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $1,150.00

..........................

42803

Pulsafeeder Clamp Mount Mixer 42803-C-4-O-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $1,155.00

..........................

J64098

Pulsafeeder Clamp Mount Mixer J64098-C-4-O-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115/230 volts ac, 50Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.

Price: $1,260.00

..........................

J42868

Pulsafeeder Clamp Mount Mixer J42868-C-4-O-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115 volts ac, 50Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.

Price: $1,040.00

..........................

J64100

Pulsafeeder Clamp Mount Mixer J64100-C-4-O-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115/230 volts ac, 50Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearing, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $1,265.00

..........................

J42878

Pulsafeeder Clamp Mount Mixer J42878-C-4-O-H/WRD
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Open Drip Proof, Sleeve Bearings, Split Phase, Capacitor Start.
Shaft: 48 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $1,070.00

..........................

42745

Pulsafeeder Clamp Mount Mixer 42745-C-M-TE-H
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.

Price: $295.00

..........................

42804

Pulsafeeder Clamp Mount Mixer 42804-C-M-TE-H/Epoxy
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Type: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Power: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $405.00

..........................

42805

Pulsafeeder Clamp Mount Mixer 42805-C-M-TE-H/Vinyl
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $410.00

..........................

42751

Pulsafeeder Clamp Mount Mixer 42751-C-M-TE-H/WRD
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 guage, rubber covered SJ cord and plug set.

Price: $325.00

..........................

42816

Pulsafeeder Clamp Mount Mixer 42816-C-M-TE-H/WRD/Epoxy
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $435.00

..........................

42817

Pulsafeeder Clamp Mount Mixer 42817-C-M-TE-H/WRD/Vinyl
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $445.00

..........................

J64107

Pulsafeeder Clamp Mount Mixer J64107-C-M-TE-H/Vinyl
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $420.00

..........................

J64109

Pulsafeeder Clamp Mount Mixer J64109-C-M-TE-H/WRD
Clamp Mount: Single C-Clamps with adjustable pivot connection.
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Shaded Pole.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $325.00

..........................

42738

Pulsafeeder Clamp Mount Mixer 42738-C-1-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.

Price: $670.00

..........................

42790

Pulsafeeder Clamp Mount Mixer 42790-C-1-TE-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $775.00

..........................

42791

Pulsafeeder Clamp Mount Mixer 42791-C-1-TE-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $780.00

..........................

J42890

Pulsafeeder Clamp Mount Mixer J42890-C-1-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 220/440volts ac, 50/60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.

Price: $865.00

..........................

J64007

Pulsafeeder Clamp Mount Mixer J64007-C-1-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 230/440 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.

Price: $865.00

..........................

J64061

Pulsafeeder Clamp Mount Mixer J64061-C-1-TE-H/WRD
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $700.00

..........................

J42882

Pulsafeeder Clamp Mount Mixer J42882-C-1-TE-H/WRD/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $805.00

..........................

J42879

Pulsafeeder Clamp Mount Mixer J42879-C-1-TE-H/WRD/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/4 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $815.00

..........................

42728

Pulsafeeder Clamp Mount Mixer 42728-C-2-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.

Price: $670.00

..........................

42770

Pulsafeeder Clamp Mount Mixer 42770-C-2-TE-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Options: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $775.00

..........................

42771

Pulsafeeder Clamp Mount Mixer 42771-C-2-TE-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $780.00

..........................

42830

Pulsafeeder Clamp Mount Mixer 42830-C-2-TE-H/WRD
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $700.00

..........................

J64012

Pulsafeeder Clamp Mount Mixer J64012-C-2-TE-H, w/o Shaft
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.

Price: $510.00

..........................

J64054

Pulsafeeder Clamp Mount Mixer J64054-C-2-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch, 316 Stainless Steel.

Price: $685.00

..........................

J64067

Pulsafeeder Clamp Mount Mixer J64067-C-2-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.

Price: $680.00

..........................

J64060

Pulsafeeder Clamp Mount Mixer J64060-C-2-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.

Price: $760.00

..........................

J64001

Pulsafeeder Clamp Mount Mixer J64001-C-2-TE-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $875.00

..........................

J64084

Pulsafeeder Clamp Mount Mixer J64084-C-2-TE-H/WRD
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $700.00

..........................

J42874

Pulsafeeder Clamp Mount Mixer J42874-C-2-TE-H/WRD/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/3 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-3/8 inch, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $815.00

..........................

42737

Pulsafeeder Clamp Mount Mixer 42737-C-3-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.

Price: $900.00

..........................

42788

Pulsafeeder Clamp Mount Mixer 42788-C-3-TE-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 44 inch, Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $1,010.00

..........................

42789

Pulsafeeder Clamp Mount Mixer 42789-C-3-TE-H/Vinyl
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $1,015.00

..........................

J64002

Pulsafeeder Clamp Mount Mixer J64002-C-3-TE-H
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch, 316 Stainless Steel.

Price: $920.00

..........................

J64032

Pulsafeeder Clamp Mount Mixer J64032-C-3-TE-H/Epoxy
Clamp Mount: Dual C-Clamps with adjustable pivot connection.
Motor Power: 1/2 Horsepower, 1725 rpm, 115/230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Ball Bearing, Automatic Overload, Capacitor Start.
Shaft: 44 inch, 316 Stainless Steel.
Impeller: Dual 2-3/8 inch, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $1,010.00

Results 1-50 of 64