	Your Cart is Empty
	View Cart

Search (Part# or Keyword)

Products
	Laboratory Equipment and Supply Products
	Chemical Metering Pumps
	Process Equipment Accessories
		Chemical Solution Tanks and Stands
		Drum-Tote-Tank Mixers-Agitators
			Bracket Mount Mixers-Agitators
			Clamp Mount Mixers-Agitators
			Flange Mount Mixers-Agitators
				42748
				42749
				42753
				42810
				42811
				42813
				42820
				42821
				42823
				42827
				42829
				42851
				J40456
				J42861
				J42864
				J42871
				J42873
				J42875
				J42884
				J42887
				J64013
				J64016
				J64017
				J64022
				J64026
				J64027
				J64028
				J64035
				J64039
				J64040
				J64044
				J64046
				J64055
				J64057
				J64058
				J64059
				J64063
				J64064
				J64069
				J64070
				J64074
				J64075
				J64077
				J64078
				J64091
				J64094
				J64103
				J64108
				J64111
				28655
			Bung Mount Mixers-Agitators
		Pump Calibration Columns
		Pump Tubing
		Flow Indicators & Flow Meters
		Pulsafeeder Five Function Valves
		Liquid Level Controller
		Saddleblock Injection Adapters
		Chemical Injection Corporation Stops
		Pump Pulsation Dampeners
		Pump Power Controllers
		Polymer Mixing Eductor
		Miscellaneous Accessories
	Process Control Systems
	HVAC Maintenance Products
	Product Specials

Flange Mount Mixers-Agitators

Flange Mount Mixer-Agitor mounts directly to a tank cover or flat surface w/o a support

The flange mount mixer provides a convenient and economical means of mount smaller mixers. The flange mount allows the mixer to be mounted directly to the tank cover or other flat surface eliminating the need for an additional mixer support. Flange mount mixers are of a one or two piece construction and are held securely to the tank surface by three or four 18/8 stainless steel fasteners which provide ample strength to withstand operational stresses.

Mixer Sizing Graph

1725 RPM MIXERS
FLUID VISCOSITY	TANK SIZE IN GALLONS
FLUID VISCOSITY	30	40	100	200	300	400
1 CPS	1/20 HP	1/20 HP	1/4 HP	1/3 HP	1/2 HP	1 HP
100 CPS	1/20 HP	1/4 HP	1/3 HP	1/2 HP	1 HP
300 CPS	1/4 HP	1/3 HP	1/2 HP	1 HP
400 CPS	1/2 HP	1 HP

NOTE: Use the above mixing graph for basic mixer sizing. Application or intended use may change manufacturer recommendations. Please consult Nova-Tech International on other than standard mixing applications.

Pulsafeeder Flange Mount Mixer Datasheet

..........................

42748

Pulsafeeder Flange Mount Mixer 42748-F-M-TE-H
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.

Price: $265.00

..........................

42749

Pulsafeeder Flange Mount Mixer 42749-F-2-O-H
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.

Price: $360.00

..........................

42753

Pulsafeeder Flange Mount Mixer 42753-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $265.00

..........................

42810

Pulsafeeder Flange Mount Mixer 42810-F-M-TE-H/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $370.00

..........................

42811

Pulsafeeder Flange Mount Mixer 42811-F-M-TE-H/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $380.00

..........................

42813

Pulsafeeder Flange Mount Mixer 42813-F-2-O-H/Vinyl
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $475.00

..........................

42820

Pulsafeeder Flange Mount Mixer 42820-F-M-TE-H/WRD/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $405.00

..........................

42821

Pulsafeeder Flange Mount Mixer 42821-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $365.00

..........................

42823

Pulsafeeder Flange Mount Mixer 42823-F-2-O-H/WRD
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $390.00

..........................

42827

Pulsafeeder Flange Mount Mixer 42827-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $280.00

..........................

42829

Pulsafeeder Flange Mount Mixer 42829-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $280.00

..........................

42851

Pulsafeeder Flange Mount Mixer 42851-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $325.00

..........................

J40456

Pulsafeeder Flange Mount Mixer J40456-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $410.00

..........................

J42861

Pulsafeeder Flange Mount Mixer J42861-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $295.00

..........................

J42864

Pulsafeeder Flange Mount Mixer J42864-F-2-O-H/WRD/Epoxy
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 36 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $500.00

..........................

J42871

Pulsafeeder Flange Mount Mixer J42871-F-M-TE-H/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $390.00

..........................

J42873

Pulsafeeder Flange Mount Mixer J42873-F-M-TE-H
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.

Price: $290.00

..........................

J42875

Pulsafeeder Flange Mount Mixer J42875-F-M-TE-H
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.

Price: $280.00

..........................

J42884

Pulsafeeder Flange Mount Mixer J42884-F-M-TE-H/WRD/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $425.00

..........................

J42887

Pulsafeeder Flange Mount Mixer J42887-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $380.00

..........................

J64013

Pulsafeeder Flange Mount Mixer J64013-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $265.00

..........................

J64016

Pulsafeeder Flange Mount Mixer J64016-F-M-TE-H/WRD/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 23 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $500.00

..........................

J64017

Pulsafeeder Flange Mount Mixer J64017-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $380.00

..........................

J64022

Pulsafeeder Flange Mount Mixer J64022-F-2-O-H/WRD/Vinyl
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $450.00

..........................

J64026

Pulsafeeder Flange Mount Mixer J64026-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $280.00

..........................

J64027

Pulsafeeder Flange Mount Mixer J64027-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $365.00

..........................

J64028

Pulsafeeder Flange Mount Mixer J64028-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $380.00

..........................

J64035

Pulsafeeder Flange Mount Mixer J64035-F-M-TE-H
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.

Price: $265.00

..........................

J64039

Pulsafeeder Flange Mount Mixer J64039-F-M-TE-H/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $390.00

..........................

J64040

Pulsafeeder Flange Mount Mixer J64040-F-2-O-H/WRD
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $390.00

..........................

J64044

Pulsafeeder Flange Mount Mixer J64044-F-M-TE-H
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.

Price: $280.00

..........................

J64046

Pulsafeeder Flange Mount Mixer J64046-F-M-TE-H
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.

Price: $280.00

..........................

J64055

Pulsafeeder Flange Mount Mixer J64055-F-M-TE-H/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $500.00

..........................

J64057

Pulsafeeder Flange Mount Mixer J64057-F-M-TE-H/WRD/Epoxy
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 23 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 guage, rubber covered SJ cord and plug set. Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $405.00

..........................

J64058

Pulsafeeder Flange Mount Mixer J64058-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $280.00

..........................

J64059

Pulsafeeder Flange Mount Mixer J64059-F-M-TE-H/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $350.00

..........................

J64063

Pulsafeeder Flange Mount Mixer J64063-F-2-O-H/WRD
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $390.00

..........................

J64064

Pulsafeeder Flange Mount Mixer J64064-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 21 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $260.00

..........................

J64069

Pulsafeeder Flange Mount Mixer J64069-F-2-O-H/WRD
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $390.00

..........................

J64070

Pulsafeeder Flange Mount Mixer J64070-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 24 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $310.00

..........................

J64074

Pulsafeeder Flange Mount Mixer J64074-F-2-O-H
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 30 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.

Price: $360.00

..........................

J64075

Pulsafeeder Flange Mount Mixer J64075-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 21 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $410.00

..........................

J64077

Pulsafeeder Flange Mount Mixer J64077-F-M-TE-H/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 20 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $390.00

..........................

J64078

Pulsafeeder Flange Mount Mixer J64078-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 115 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 25.5 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $295.00

..........................

J64091

Pulsafeeder Flange Mount Mixer J64091-F-M-TE-H/WRD/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 20 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set & Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $430.00

..........................

J64094

Pulsafeeder Flange Mount Mixer J64094-F-2-O-H/Epoxy
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 34 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: Special corrosion resistant epoxy coating for stainless steel impeller and shaft.

Price: $470.00

..........................

J64103

Pulsafeeder Flange Mount Mixer J64103-F-M-TE-H/Vinyl
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 60Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: Special vinyl corrosion resistant coating for stainless steel impeller and shaft when using chlorine.

Price: $410.00

..........................

J64108

Pulsafeeder Flange Mount Mixer J64108-F-M-TE-H/WRD
Motor Power: 1/20 Horsepower, 1500 rpm, 230 volts ac, 50Hz.
Motor Type: Totally enclosed fan-cooled (TEFC), Split Phase, Ball Bearings, Non Ventilated.
Shaft: 28 inch, 316 Stainless Steel.
Impeller: Single 1-1/4 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $305.00

..........................

J64111

Pulsafeeder Flange Mount Mixer J64111-F-2-O-H/WRD
Motor Power: 1/3 Horsepower, 1725 rpm, 115 volts ac, 60Hz.
Motor Type: Open Drip Proof, Split Phase, Sleeve Bearings.
Shaft: 30 inch, 316 Stainless Steel.
Impeller: Single 2-1/2 inch diameter, 316 Stainless Steel.
Included Option: 8 feet, 3 wire, 18 gauge, rubber covered SJ cord and plug set.

Price: $425.00

..........................

28655

Pulsafeeder 28655 Suction Tube Shield Assembly
29 inch, 55 gallon
1 inch PVC, Tube prevents suction tubing from entangling with mixer blade.

Price: $41.50

Results 1-50 of 51