J56D-468TI

LMI Series J5 Metering Pump (12 VDC).
2 GPH @ 20 PSI, Liquid End 468TI, 12 Volt DC.

Dual Manual Control
Stroke frequency and stroke length are manually adjustable.

See Specifications and Downloads tabs for detailed specifications and features.

---

General Description
LMI Series J5 (12 VDC) chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end. Speed (stroking frequency) may be externally controlled for automatic systems.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 22 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 7.6 lbs (3.5 kg).
Pressure Relief
LMI 4-Function Valve is recommended to provide automatic pressure relief, anti-syphon protection, and priming aid.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve, Tubing, Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections on models with tubing connections. A foot valve with integral one piece strainer shall be provided for the suction line, and an injection/back pressure check valve with 1/2" NPT male connection for the injection point. The injection check valve shall incorporate a dilating orifice which inhibits accumulation of crystalline deposits.

RPM-362/368 LMI Pump LiquiPro RPM Kit Quantity Price 1 + $100.70 RPM-362/368 Quantity Price 1 + $100.70 LMI Pump LiquiPro RPM Kit LMI LE-468TI LMI Pump LiquiPro Liquid End Assembly Quantity Price 1 + $270.75 LE-468TI Quantity Price 1 + $270.75 LMI Pump LiquiPro Liquid End Assembly LMI 250 ML CC Koflo 0-4 GPH Pump Calibration Column (Calibration Cylinder) Quantity Price 1 $50.00 2 – 9 $47.50 10 + $45.00 250 ML CC Quantity Price 1 $50.00 2 – 9 $47.50 10 + $45.00 Koflo 0-4 GPH Pump Calibration Column (Calibration Cylinder) Calibration Column / Calibration Cylinder Koflo Pump Flow Calibration 250 mL gallons/hour and milliliters/minute 0.05 GPH and 2 ML/MIN Schedule 40 clear PVC column tube and industrial grade machined PVC top and bottom caps 4.0 GPH (250 ML/MIN) 1/2" FNPT End Connections Fixed Caps 1.650" Tube OD x 16-1/4" Column Height

LMI Series J5 Metering Pump Datasheet.pdf
LMI Series J5 Metering Pump Manual.pdf
LMI Metering Pumps Brochure.pdf