P122-358SI

LMI Roytronic Series P Metering Pump.
0.21 GPH @ 150 PSI, LiquiPro Liquid End 358SI, 230 VAC 50/60 Hz, US Plug.

Dual Manual Control
Stroke frequency and stroke length are manually adjustable.

See Specifications and Downloads tabs for detailed specifications and features.

---

General Description
LMI Roytronic Series P chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 22 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 7.6 lbs (3.5 kg).
Pressure Relief
The LMI 4-Function Valve is recommended with a LiquiPro or AutoPrime Liquid End to provide automatic pressure relief.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve, Tubing, Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections on models with tubing connections. A foot valve with integral one piece strainer shall be provided for the suction line, and an injection check/back pressure valve with 1/2" NPT male connection for the injection point. The injection check valve shall incorporate a dilating orifice which prohibits scale formation and accumulation of crystalline deposits.

RPM-352/358 LMI Pump LiquiPro RPM Kit Quantity Price 1 + $90.25 RPM-352/358 Quantity Price 1 + $90.25 LMI Pump LiquiPro RPM Kit LMI LE-358SI LMI Pump LiquiPro Liquid End Assembly Quantity Price 1 + $228.95 LE-358SI Quantity Price 1 + $228.95 LMI Pump LiquiPro Liquid End Assembly LMI

LMI Roytronic Series P Metering Pump Datasheet.pdf
LMI Series P Metering Pump Specification Sheet.pdf
LMI Series AA-B-C-E-J-P Metering Pumps Manual.pdf
LMI Metering Pumps Brochure.pdf