	Your Cart is Empty
	View Cart

Search (Part# or Keyword)

Products
	Laboratory Equipment and Supply Products
	Chemical Metering Pumps
	Process Equipment Accessories
	Process Control Systems
		Process Control Instrumentation
		Cooling Tower Controllers
			MC9200 Series Cooling Tower Controllers
			MC9300 Series Cooling Tower Controllers
			MC9500 Series Cooling Tower Controllers
			MC9000 Series Cooling Tower Controller Parts
			MCT100 Series Cooling Tower Controllers
			MicroVision Series Cooling Tower Controllers
			MICROtrac Series Cooling Tower Controllers
				MTC1PTA-XXX
				MTC1PTB-XXX
				MTC1PTF-XXX
				MTC1PTL-XXX
				MTC1PTX-XXX
				MTC1PXF-XXX
				MTC1PXX-XXX
				MTC1XTF-XXX
				MTC1XTX-XXX
				MTC1XXF-XXX
				MTC1XXX-XXX
				MTC2LTF-XXX
				MTC2LTX-XXX
				MTC2LXX-XXX
				MCL1PTX-XXX
				MCL1PXX-XXX
				MCL2LTF-XXX
				MCL2LTX-XXX
			DCS 900 Series Cooling Tower Controllers
			ACT Series Cooling Tower Controllers
			CTS Cooling Tower Control Control System
		Boiler Controllers
	HVAC Maintenance Products
	Product Specials

MICROtrac Series Cooling Tower Controllers

Pulsafeeder MICROtrac Series Cooling Tower & Closed Loop Controllers - microprocessor based feed and bleed toroidal conductivity control

The Pulsafeeder MICROtrac is a microprocessor based feed and bleed toroidal conductivity controller designed to control conductivity and feed inhibitor in cooling tower or closed loop systems.
The MICROtrac measures the conductivity of the cooling tower recirculating water via a toroidal conductivity sensor. The controller activates two independent relay outputs based on a bleed and feed mode of operation. When the conductivity measurement goes above the user defined set point, the two relays are activated until the conductivity drops below the set point and the fixed differential value, or until the user programmable limit times for feed or bleed are exceeded.

Key Features:
No Calibration Needed. The MICROtrac toroidal conductivity sensor is factory calibrated for the life of the probe.
Reduced potential for fouling. By design, the MICROtrac toroidal conductivity sensor has no exposed electrodes, which means that there is nothing to wear out or foul.
Large conductivity range of 0-9999 µS/cm range, making it ideal for other applications as well, such as rinse, industrial process, wastewater, etc.
Simple user interface. A large LCD display and simple programming via a three-button interface making the unit extremely easy to set up and program.

Pulsafeeder MICROtrac Cooling Tower Controller Datasheet
Pulsafeeder MICROtrac Cooling Tower Controller Manual

..........................

MTC1PTA-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Standard Panel & Flow Assembly.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $680.00

..........................

MTC1PTB-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Deluxe Panel & Flow Assembly, 1 pump mount, in/out ball valves, strainer, injection tee & rails.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $920.00

..........................

MTC1PTF-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Flow Switch with 3' cable.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $595.00

..........................

MTC1PTL-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Standard Flow Assembly (no panel).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $595.00

..........................

MTC1PTX-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $515.00

..........................

MTC1PXF-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Standard (no tee).
Flow Switch: Flow Switch with 3' cable.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $560.00

..........................

MTC1PXX-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Standard (no tee).
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $480.00

..........................

MTC1XTF-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord & Liquid-Tight relay connections.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Flow Switch with 3' cable.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $575.00

..........................

MTC1XTX-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord & Liquid-Tight relay connections.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $495.00

..........................

MTC1XXF-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord & Liquid-Tight relay connections.
Sensor Tee: Standard (no tee).
Flow Switch: Flow Switch with 3' cable.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $540.00

..........................

MTC1XXX-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 115 Volt.
Relay & Power Wiring: Prewired power cord & Liquid-Tight relay connections.
Sensor Tee: Standard (no tee).
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $460.00

..........................

MTC2LTF-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 230 Volt (no prewired power cord or relays available).
Relay & Power Wiring: Liquid-Tight connections only.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Flow Switch with 3' cable.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $575.00

..........................

MTC2LTX-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 230 Volt (no prewired power cord or relays available).
Relay & Power Wiring: Liquid-Tight connections only.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections..
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $495.00

..........................

MTC2LXX-XXX

Pulsafeeder MICROtrac Series Toroidal Conductivity Cooling Tower Controller.
Voltage: 230 Volt (no prewired power cord or relays available).
Relay & Power Wiring: Liquid-Tight connections only.
Sensor Tee: Standard (no tee).
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CT models are designed for bleed and feed control in cooling tower systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $460.00

..........................

MCL1PTX-XXX

Pulsafeeder MICROtrac Toroidal Conductivity Closed Loop Controller.
Voltage: 115 Volts.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CL models are designed for bleed and feed control in closed loop systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $515.00

..........................

MCL1PXX-XXX

Pulsafeeder MICROtrac Toroidal Conductivity Closed Loop Controller.
Voltage: 115 Volts.
Relay & Power Wiring: Prewired power cord and relays.
Sensor Tee: Standard (no tee).
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CL models are designed for bleed and feed control in closed loop systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $480.00

..........................

MCL2LTF-XXX

Pulsafeeder MICROtrac Toroidal Conductivity Closed Loop Controller.
Voltage: 230 Volts (no prewired power cord or relays available).
Relay & Power Wiring: Liquid-Tight connections only.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Flow Switch with 3' cable.
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CL models are designed for bleed and feed control in closed loop systems.
Includes: toroidal sensor with 3' signal cable and power cord.

Price: $575.00

..........................

MCL2LTX-XXX

Pulsafeeder MICROtrac Toroidal Conductivity Closed Loop Controller.
Voltage: 230 Volts (no prewired power cord or relays available).
Relay & Power Wiring: Liquid-Tight connections only.
Sensor Tee: Sensor Tee with 3/4" inlet/outlet connections.
Flow Switch: Standard (no flow switch).
MICROtrac controllers use toroidal sensor not susceptible to fouling eliminating the need for routine cleaning and calibration. The MICROtrac CL models are designed for bleed and feed control in closed loop systems.
Includes: toroidal sensor with 15' signal cable and power cord.

Price: $495.00