Lovibond® hydrosense Legionella Industrial Systems Test Kit (5 Tests)
The Legionella System Test Kit is for detecting Legionella in a water sample — it is ideal for on-line and a variety of industrial applications.
This test procedure utilizes hollow fiber filtration modules which attach directly to the provided sample point fittings (both a 1/2” and 3/4” female threaded fittings are provided). The filtered sample increases the sensitivity of the test.
This filtration step requires no pumping — just connect the sample point fitting to the water system (such as a shower head or on-line sample point) and use the system pressure to drive the filtration.
The pre-filled syringes contain the required recovery buffer, so there is no need to measure or dilute solutions.
With results in 30-35 minutes (including sample prep-time), the test allows for immediate understanding and response to the water system conditions. Regular use will increase confidence in your Legionella control procedures and reduce risk of outbreaks and litigation!
- Most Sensitive of all tests
- Sample Type: water sample obtained by connection to pipe fitting (Plumbing Systems, Cooling Systems)
- Sample Volume: 250 ml
- Sensitivity: 100 CFU/L
- Pack Size: 5 Tests
- Less than 10 minutes filtering and 25 minute test
Hydrosense Legionella Field TestProduct Line
Units of Measurement
Hose Barb Size
Draft Shield Dimensions
Max. Flow (GPH)
Max. Flow (GPD)
Max. Pressure (PSI)
Max. Viscosity (cps)
Max. Strokes per Minute
Turn Down Ratio
Head / Fittings
Valve / Seat / O-ring
Field of View
Max. Controlled Time Settings
Rim to Plate
Custom Fluorescence Filters
Fluorescence Filter Cubes
Horizontal Base Pole
Pod Ring I.D.
Vertical Base Pole
Zoom Range (Primary)
5 Test Strips with Dispensing Pipettes, 5 Syringes with Recovery Buffer, Sample Collection Jar, 5 single-use filters, female threaded sample point fitting, and instructions in a carrying case.Includes
5 TestsUnit Size
|Number of tests:||5|
|Bacteria Detected:||Legionella pneumophila serogroup 1|
|Detection Method:||Lateral flow immunochromatographic assay|
|Lower Limit of Detection:||100 CFU (0.1 CFL/ml)|
|Test Volume:||100 μL (exact dispensing pipette provided)|
|Suggested Sample Volume:||250 ml filtered sample|
|Test Development Time:||25 minutes|
|Operator Time:||5 - 10 minutes|
|Specificity:||Tested against a wide range of waterborne bacteria, including Acinetobacter calcoaceticus, Aeromonas hydrophila subsp. hydrophila, Bacillus subtilis, Burkholderia cepacia, Citrobacter freudii, Citrobacter koseri, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Pseudomonas aeruginosa, Pseudomonas fluorescens, Pseudomonas putida, Pseudomonas stutzeri, Ralstonia pickettii, Raoultella terrigena, Streptococcus pyrogenes, Yersinia ruckeri.|
No cross reactions observed at concentrations ≤109 CFU/L.
Staphylococcus aureus has been observed to cross react with the test at concentrations >108 CFU/L.
Legionella pneumophila serogroups 4 & 7 cross react with the test at concentrations > 6×109 CFU/L. The test does not react with any other L. pneumophila serogroups or L. species tested.
|Biocides:||The product has been tested with a range of common biocides and biodispersants used in Legionella control, at their normal maximum operating concentration. Active ingredients tested include: glutaraldehyde, didecyl-dimethylammonium chloride, isolthazoles, ibromonitrilopropionamide, ionic and non-ionic surfactants.The test gives a false positive if used with polymeric biguanide or THPS.|
|Shelf Life:||18 Months from manufacture (stored at room temp. (<30°C) in original packaging).|