 |
 |
 |
| Pulsatron Plus Series WT |
|
|
|
|
Pulsatron Plus Series WT combination pump & controller provides cooling tower make-up water control (water meter input & bleed relay) with water meter input to also control the pump feedThe PULSAtron Series WT pump was designed to control the feed and bleed cycle in an open-air cooling tower. The feed and bleed cycle is initiated and controlled by input from a water meter. The Series WT combines everything you need to bleed off the tower and feed inhibitor into one unique, compact package to create a simple and cost effective metering and control system.
The Series WT includes a water meter input with programmable pulse timers that control the feed and bleed relays. When the water level in the cooling tower drops, the make-up water is turned on creating flow through the water meter. As make-up water passes through the water meter, it generates a series of pulses based on the volume of flow.
The Series WT has two pulse counters with independent set points that monitors output of the water meter. One controls the pump and one controls the bleed relay. When the counter exceeds the set point, the counter is reset and the control function is activated for the run-time specified at set-up.
Features:
- Complete Control System in one unique package. There is no need for a separate controller. All control functions are integrated into the pump eliminating the expense of purchasing and installing another piece of equipment.
- Easy to program User Interface. There are no complicated menu structures in order to set up the PULSAtron Plus for your specific parameters. Simply press the universally recognized symbol key identifying the function you wish to adjust and change the value with the up or down arrow key.
- Dual Programmable Pulse Counters. Independent timers for feed and bleed provide a greater level of control within your application.
- Water Meter Input. User determines the amount of chemical to feed and bleed time based on the volume of make-up water. Programmable timer, stroke frequency and count set point combine to provide precise control over the amount of chemical used.
- Reliable metering performance. Guided check valves with the proven seat and ball designs make PULSAtron the most reliable metering pumps in the world. PULSAtron pumps are known for excellent suction lift characteristics resulting in highly dependable chemical additions.
- Rated 'hot' for Continuous duty. PULSAtron Plus pumps continue to meet their specifications for pressure and capacity during extended use. The solenoid is separately encapsulated in a fin-cooled, thermal-conductive enclosure that effectively dissipates heat away from the electronics.
- Leak-free, wet end without seals. Our diaphragms are of superior construction - PTFE-faced, bonded to a composite of Hypalon and fabric layers and reinforced with a metal insert for optimum flexibility and durability..
Pulsatron Plus Series WT Metering Pump Datasheet
Pulsatron Plus Series Metering Pump Catalog (pages 4-45).
Pulsatron Plus Series WT Metering Pump Owner's Manual
Chemical Resistance Guide
Pulsatron Metering Pump Parts |
|
|
| |
| .......................... |
| .......................... |
| .......................... |
| .......................... |
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
