PULSAtron Series HV Metering Pump
48 GPD @ 110 PSI, 115 VACExternal Pacing Input with Dual Manual Control and Stop Function Input
Stroke frequency control via contact closure signal input, manual stroke length control. Stroke frequency is manually adjustable when in local control. Includes stop function input.
Pulsafeeder PULSAtron Series HV (High Viscosity) chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series HV offers accurate metering of fluids with viscosities up to 20,000 CPS. Series HV has a guided check valves, with state-of-the-art seat and ball designs, providing precise seating and excellent priming and suction lift characteristics. The timing circuit is highly reliable and by design, virtually unaffected by temperature, EMI, and other electrical disturbances. The Series HV is also water resistant for both indoor and outdoor applications.Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via external pacing and stop function inputs. Auto-Off-Manual switch.Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.Pulsafeeder PULSAtron Series HV Chemical Metering Pump - Key Features
- Viscosities to 20,000 CPS.
- Manual Control by on-line adjustable stroke rate and stroke length.
- Highly Reliable timing circuit.
- Circuit Protection against voltage and current upsets.
- Panel Mounted Fuse.
- Solenoid Protection by thermal overload with auto-reset.
- Water Resistant, for outdoor and indoor applications.
- Indicator Lights, panel mounted.
- Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
- Reliable metering performance.
- Rated "hot" for continuous duty.
- Leak-free, sealless, liquid end.
Metering Pump, Diaphragm, SolenoidType
PULSAtron Series HVProduct Line
Units of Measurement
Hose Barb Size
Draft Shield Dimensions
External Pacing / Off / ManualOperating Modes
2.00Max. Flow (GPH)
48Max. Flow (GPD)
110Max. Pressure (PSI)
20,000Max. Viscosity (cps)
125Max. Strokes per Minute
External Pacing Input with Dual Manual Control and Stop Function InputFlow Control
100:1Turn Down Ratio
PVCHead / Fittings
316 SSValve Balls
PTFE faced CSPEDiaphragm
TFEValve / Seat / O-ring
Tubing 3/4" O.D.Connections
115 VAC 50/60 Hz, US PlugPower Supply
Field of View
Max. Controlled Time Settings
Rim to Plate
Custom Fluorescence Filters
Fluorescence Filter Cubes
Horizontal Base Pole
Pod Ring I.D.
Vertical Base Pole
Zoom Range (Primary)
No Bleed Valve with this model.Notes
A 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 8' discharge tubing and Owners Manual.Includes