LMI-PD762-848NI

(0)No Reviews yet
$1,017.00
SKU: LMI-PD762-848NI

New

LMI Series PD Metering Pump.
2 GPH; 70 PSI, 230 VAC 50/60 Hz, US Plug.
(Molded FastPrime Head, Double Ball Check Valves)

Enhanced Control with Pulse Input, Remote Stop/Start, and Tank Level Input

External control capability through pulse input and low level float switch plus manual control of speed (stroking frequency).

See Specifications and Downloads tabs for detailed specifications and features.

General Description
LMI Series PD models starting PD7 chemical metering pumps are positive displacement, Liquifram type pumps with Enhanced Controls.
Pump Controls
Enhanced control functionality includes a 2.4 inch Color LCD, External Control Inputs, Calibration Assist, System & User Totalizers, and StayPrime Degassing Technology. Stroke frequency is digitally adjustable. Stroke length is fixed to maintain calibration across the adjustable range. Models with FastPrime liquid ends allow for fast and easy priming with an integrated bleed valve. Models with AutoPrime liquid ends are designed specifically for off-gassing liquids
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage.
Pressure Relief
The LMI 4-Function Valve is recommended with a FastPrime or AutoPrime Liquid End to provide automatic pressure relief.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of rugged construction with NEMA 4X/IP 65 housing for the harshest environments and outdoor use. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve, Tubing, Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).


Product Type: Diaphragm Metering Pump, Solenoid Driven
Brand: LMI
Product Line: Series PD
Max Flow (GPH): 2.00
Max Flow (GPD): 48.00
Max Pressure (PSI): 70
Max Viscosity (CPS): 400
Max Strokes per Minute: 160
Flow Control: Enhanced Control with Pulse Input, Remote Stop/Start, and Tank Level Input
Turn Down Ratio: 200:1
Head/Fittings: PVC / PVC (Molded FastPrime Head, Double Ball Check Valves)
Valve Balls: Ceramic
Diaphragm: Fluorofilm
Valve / Seat / O-Ring: Polyprel
Connections: Tubing PE 3/8" O.D.
Power Supply: 230 VAC 50/60 Hz, US Plug
Net Weight: 10 lbs
Includes: External Control Cable/Connector (5-pin), Tubing, Foot Valve and Strainer, Ceramic Foot Valve Weight, 1/2" NPT Male Injection Check/Back Pressure Valve, and Quick Start Guide

Ratings & Reviews

No reviews available

Be the first to Write a Review