WD-35434-00

(0) No Reviews yet
$1,913.60 $2,392.00
QuantityPrice
1 +$2,392.00
1 – 1$1,913.60
2 – 3$1,794.00
4 +$1,674.40
SKU: WD-35434-00

New

Oakton PCD 650 Portable Waterproof pH / Conductivity / Dissolved Oxygen Meter with Probes.

These top-of the-line waterproof meters offer features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter. Datalog up to 500 points either automatically, manually, or at timed intervals. User-selectable “calibration due” alarms, automatic or manual standards recognition, and single or multiple calibration points provide flexibility in meeting your data quality objectives. Infrared (IrDA) wireless technology lets you easily download data—no need for additional cords. The large backlit LCD shows the measured value, measured units, temperature, time, battery life, and menu options.

pH range is from –2.000 to 19.999 with accuracies up to ±0.002. pH calibration capabilities including up to six calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto-buffer recognition of USA, NIST, DIN, and PWB standards.

Multiparameter meter measures conductivity (up to 500 mS), TDS, salinity, or resistivity with either a 2-or 4-electrode conductivity cell. Linear or pure-water temperature compensation curve provides accurate data at all levels of conductivity. Also features set point alarms to indicate when concentrations are outside of programmed limits.

Determines oxygen saturation up to 600% and concentration up to 49.49 mg/L. The galvanic dissolved oxygen probe does not require any warm-up time so you can take readings immediately. Salinity correction is automatically compensated for after manual input of concentration. Barometric pressure is automatically compensated for by the included barometer.


Product Type: pH, ORP, & ISE Meters
Brand: Oakton
Resolution: 0.1/0.01/0.001 pH, 0.1 mV, 2 or 3 digits Ion, 0.05% full scale CON/Resistivity/TDS/Salinity, 0.01 mg/L
Accuracy: ±0.002pH, ±0.2 mV, 0.5% FS (monovalent); 1% FS (divalent) Ion, ±1% full-scale CON/Resistivity/TDS/Salinity, ±0.1%/±0.01 mg/L
ATC: Yes (0 to 100°C)
Operating Modes: pH, ORP, CON, ION, TDS, Resistivity, Salinity, DO
Units of Measure: -2.000 to 20.000 pH, ±2000 mV, 0.001 to 19,900 ppm, molar, or mg/L, 0 to 500 mS CON, 0 to 20.000 Mµ, 0 to 500 ppt TDS, 80 ppt (Salinity), 0 to 600% or 49.49 mg/L
Includes: "All-in-One" probe, conductivity probe, dissolved oxygen probe, and batteries.

Ratings & Reviews

No reviews available

Be the first to Write a Review