CPI-35625-70
Images are for representation only. Actual product may differ in size, color or options.
Digi-Sense FP-PROBE Replacement Probe, 3.2 inch L x 0.125 inch Dia, for Digi-Sense 35625-40 (each)
The modular probe of the food safety thermometer is replaceable. To replace probe, extend the probe partially to access the rubber caps. Carefully pry up the rubber caps using a pin, and remove the screws using a #2 cross-tip screwdriver as shown. Grasp the probe and carefully separate the old probe from the probe base. Install the new probe in the reverse order, firmly tightening the screws and replacing the rubber plugs. The calibration accuracy of the unit is not affected by probe replacement
The modular probe of the food safety thermometer is replaceable. To replace probe, extend the probe partially to access the rubber caps. Carefully pry up the rubber caps using a pin, and remove the screws using a #2 cross-tip screwdriver as shown. Grasp the probe and carefully separate the old probe from the probe base. Install the new probe in the reverse order, firmly tightening the screws and replacing the rubber plugs. The calibration accuracy of the unit is not affected by probe replacement
| Product Type: | Temperature Probe |
| Brand: | Digi-Sense |
| Material: | Stainless Steel |
| Temperature Range: | -40 to 392°F (-40 to 200°C) |
| Probe Length: | 3.2 inches x 0.125 inch diameter |
| For Models: | Digi-Sense 35625-40 |
| Overall Dimensions: | Sheath: 3.2 inch length x 0.125 inch diameter |
