LMI-FM-259
Images are for representation only. Actual product may differ in size, color or options.
LMI Digi-Pulse Flow Monitor for LEGACY liquid ends with 3/8 inch check balls and 3.5 mm connector
Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor. Designed to electrically signal a low flow or no flow condition, you can be assured of your pumping performance; an advantage when working with pulsating or very low flows. A transmitter can be connected to a remote counting or recording device. The FM-259/359/459/859 transmitters are wired to be plugged directly into the receptacles of Series B9/C9 pump housings. The Digi-Pulse™ Flow Monitor is adjustable to any desired pulsating flow rate within its range.
Pulsating flow of your pump can be monitored and transmitted using the LMI Digi-Pulse™ Flow Monitor. Designed to electrically signal a low flow or no flow condition, you can be assured of your pumping performance; an advantage when working with pulsating or very low flows. A transmitter can be connected to a remote counting or recording device. The FM-259/359/459/859 transmitters are wired to be plugged directly into the receptacles of Series B9/C9 pump housings. The Digi-Pulse™ Flow Monitor is adjustable to any desired pulsating flow rate within its range.
Product Type: | Flow Monitor |
Brand: | LMI |
Product Line: | Digi-Pulse |
Material: | PVDF |
Max Flow (GPH): | 7.9 |
Max Pressure (PSI): | 150 |
Max Strokes per Minute: | 100 |
Valve / Seat / O-Ring: | Polyprel |
Connections: | 3.5 mm connector |
Cable Length: | 20 inches (0.5 m) |
Body: | PVDF |
For Models: | LMI LEGACY liquid ends with 3/8 inch check balls |